Three Top Tips On How To Choose Plastic Pipes For Hot Water Supply
Wit hot water now being supplied through the pipelines, there is greater convenience all around. From domestic to commercial buildings and even in industrial buildings, pipes hot water has made tasks involving water at high temperatures significantly easier. However, to ensure that the supply of hot water to the appropriate supply points is seamless, it is important that the plumbing network have the appropriate pipes. It is therefore even more critical to choose the best materials for the pipe network supplying hot water. Plastic pipes are nowadays widely being used for plumbing pipe networks in houses but these must too be chosen while keeping in mind the individual properties of each type of plastic. Since not all plastic pipes are suited for the supply of hot water, here are three tips on how to choose plastic materials for hot water pipes:
1.
For selecting the best plastic pipe for hot water, select materials which are able to sustain the expected
temperatures and pressures. Pipes and fittings made from chlorinated polyvinyl
chloride or CPVC, polypropylene random copolymer (PPR) and polyethylene (PEX)
can withstand temperature range from 0 to 93 degree Celsius, which is adequate
for the hot water supplied in homes through geysers or other such heating appliances
for domestic use.
2.
The conditions of installation
will also determine the choice of pipe. If the plumbing network of your
building or house is installed outdoors and exposed to ultraviolet (UV) rays,
then you will need to choose a plastic material which is able to withstand the
effect of UV rays. As the UV rays contain harmful radiations, if allowed to
penetrate exposed pipes, can cause contamination of the water being supplied
therein. Hence, to prevent contamination, it is important to choose plastic
pipes and fittings for the outdoors which are resistant to UV rays.
3.
Plastic pipes being chosen for
hot water supply must also be resistant to meltdown or warping under high
temperature conditions. If the pipes are damaged due to the supply of hot
water, they can become warped and leak, which in turn can be hazardous to the
entire plumbing network.
If
you are looking for suitable pipes for the supply of hot water in the plumbing
system of your house, choose the plastic pipes and fittings from Wavin. One of
the leading manufacturers and suppliers of plastic pipes and fittings, Wavin
brings the best quality CPVC, SuperTemp CPVC, PPR and PEX pipes for hot water
supply in domestic and commercial establishments.
Comments
Post a Comment